Search results for: 'manufacturer monitor motor pulley'
- KONE Steel AMDC1 Diverting Pulley (Left Hand) Part Number: 11086Dimensions:Roller - 114mm OD x 6mm Wide
Bracket - 123.5mm High x 130mm Wide x 50mm Deep
£35.00 - KONE Steel AMDC1 Diverting Pulley (Right Hand) Part Number: 11087Dimensions:Roller - 114mm OD x 6mm Wide
Bracket - 123.5mm High x 130mm Wide x 50mm Deep
£35.00 - KONE Steel AMD Diverting Pulley (Left Hand) Part Number: 11088Dimensions:Roller - 114mm OD x 6mm Wide
Bracket - 123.5mm High x 155mm Wide x 60mm Deep
£35.00 - KONE Steel AMD Diverting Pulley (Right Hand) Part Number: 11089Dimensions:Roller - 114mm OD x 6mm Wide
Bracket - 123.5mm High x 155mm Wide x 60mm Deep
£35.00 - KONE Toothed Belt Pulley on Bracket Part Number: 11092Dimensions:Bracket - 80mm Long x 43mm Wide x 42mm Deep
16mm Fixing Slot Centres - 60mm
Roller - 39mm OD x 20mm Wide£32.00 -
- KONE Toothed Belt Pulley on Bracket Suit ADV Eline Monospace Part Number: 11094Dimensions:Bracket - 80mm Long x 60mm Wide x 42mm Deep
20mm Fixing Slot Centres - 50mm x 15mm
Roller - 43mm OD x 35mm£36.00 - KONE Divertor Pulley for Closing Weight Part Number: 11105Dimensions:
49mm OD x 10mm Wide x 12mm ID
£22.00 - ORONA Idle Pulley Tensioner Assembly PM-300 Part Number: 11709Dimensions:Bracket - 71mm Long (128mm Including M6 Bolt) x 46mm Wide
Roller - 32mm OD x 22mm Wide with M10 Concentric Pin£28.50 - GAL Stop Operator Pulley in Aluminium Part Number: 12982Dimensions:
Body - 63mm Long x 19mm Wide
Roller - 39mm OD x 20.5mm Wide£20.00 - GAL Drive Pulley Part Number: 13007Dimensions:Pulley - 325mm OD
Fixing Plate Hole Centres - 92mm x 46mm
£415.00 - GAL Pulley Assembly with Sprocket (to Suit 1/2" Chain) Part Number: 13043Dimensions:
Pulley: 325mm OD x 19.3mm Wide with 13.25mm Track Width
Fixing Plate: 120mm Long x 74mm Wide x 119mm High (83mm x 47mm Hole Centres)£495.00 - GAL Motor Pulley with Keyway Part Number: 13050Dimensions:50mm OD x 16mm Wide x 5/8" (15.875mm) ID£44.00
- GAL Stop Operator Pulley in Aluminium Part Number: 13052Dimensions:
Body:Â 57mm Long x 6mm Wide x Thick 19mm
Roller:Â 40mm OD x 20.5mm Wide
£22.00 - ALJO Pawl Pulley Set Part Number: 18208Dimensions:
53mm OD x 10mm Wide with 12mm OD x 48mm Long Shaft
£35.00 -
- FERMATOR Motor Singlephase PMT.M500.C0000 (Replaces Obsolete Mono230V 300 rpm 50Hz) Part Number: 18900Dimensions:
128mm Wide x 128mm High x 99mm Deep
£465.00 - FERMATOR Motor with Synchronous Encoder Part Number: 18901Dimensions:123mm Long x 123mm Wide x 40mm Deep£465.00
- FERMATOR CMT-VFE001 Motor VVVF with Encoder Part Number: 18902Dimensions:147mm Long x 147mm Wide x 141mm Deep£650.00
-
-
-
- FERMATOR Nylon Motor Pulley to Suit V Belt Part Number: 18985Dimensions:43mm OD x 12mm Wide x 13mm ID£28.00
- FERMATOR Motor Pulley (Eagle Track) Part Number: 18995Dimensions:
24mm OD x 13mm Wide x 6.25mm ID
£28.00 - FERMATOR Motor Pulley (VF with Reduction) Part Number: 19016Dimensions:
38mm OD x 12mm Wide x 14mm ID
£50.00 - FERMATOR Motor Pulley Tapered (Post 2010) Part Number: 19018Dimensions:When assembled - 37mm OD x 22mm Wide x 6mm ID£44.00
-
- FERMATOR Microswitch Operator Pulley Cam Part Number: 19034Dimensions:100mm Long x 48mm Wide x 49mm OD x 43mm ID x 22mm Deep£20.00
- FERMATOR Mounting Bracket with Idler Return Pulley Part Number: 19039Dimensions:Bracket - 130mm Long x 120mm Wide x 35mm Deep
Roller - 32mm OD x 22mm Wide
Thread - M6 x 58mm Long£89.00 - FERMATOR Nylon Toothed Reduction Pulley (with Keyway & Key) Part Number: 19050Dimensions:86mm OD x 16mm ID£37.00
- FERMATOR Nylon Toothed Reduction Pulley (No Keyway) Part Number: 19051Dimensions:86mm OD x 16mm ID£35.00
- FERMATOR Trapezial Reduction Pulley (No Teeth) Part Number: 19052Dimensions:86mm OD x 16mm ID£35.00
- FERMATOR VVVF Motor Pulley (2 Part Set) (Pre 2010) Part Number: 19058Dimensions:Part 1 - 37mm OD x 20.5mm Wide x 8mm ID Part 2 - 37mm OD x 6mm Wide x 6mm ID£22.00
- FERMATOR, ORONA Nylon Idler Return Pulley with M10 Concentric Pin Part Number: 19083Dimensions:32mm OD x 22mm Wide with M10 Concentric Pin£31.00
- FERMATOR 20mm OD Motor Pulley (Suits Folding Doors) Part Number: 19084Dimensions:20mm OD x 11mm Wide x 10mm ID£28.00
- FERMATOR 43mm OD Motor Pulley (for Folding Doors) Part Number: 19085Dimensions:
43mm OD x 11.5mm Wide x 13mm ID
£30.00 - FERMATOR 35mm OD Motor Pulley (for Folding Doors) Tapered ID Part Number: 19090Dimensions:
35mm OD x 11.5mm Wide x 13.7mm ID Tapering to 12.7mm
£30.00 - THYSSEN Nylon Drive Belt Pulley Part Number: 19158Dimensions:
36.5mm OD x 27mm Wide x 10mm ID
£34.00 - THYSSEN Nylon Reduction Pulley Part Number: 19212Dimensions:
118mm OD x 58mm Wide x 20mm ID
£45.00 - OTIS Steel Sheave/Pulley for Aircord on 2PCO & 2PSO Car D2200 Doors Part Number: 20218Dimensions:66mm OD x 8.5mm Wide x 8mm ID£25.00
- OTIS 100mm Long Ram Head Pulley Guide Shoe Part Number: 21050Dimensions:100mm Long x 85 mm Wide x 37 mm Deep£75.00
- BENNIE Landing Door Lock Coupler *Special Order* (Sample Required to Manufacture) Part Number: 22955Dimensions:
197mm Long x 71mm High (Max) x 48mm Wide (Max)
Rollers- 35mm OD x 14mm WideÂ
Price on Request -
-
- SELCOM Nylon Smooth Roller for Toothed Belt Part Number: 31940Dimensions:70mm OD x 20mm Wide x 17mm ID
Shoulder - 50mm OD x 12mm Deep£22.00 - SELCOM Nylon Toothed Roller for Toothed Belt Part Number: 31941Dimensions:70mm OD x 20mm Wide
Shoulder 50mm OD x 12mm Deep and Keywayed Centre - 22mm ID£18.50 - SELCOM Motor Brake Lever with Lining Part Number: 31977Dimensions:
115mm Long x 71.5mm Wide x 12.5mm Deep
£10.50 - SELCOM Motor Idle Poly Belt - Opti Belt (6 Ribs) (RB/PJ965) Part Number: 31990Dimensions:
965mm Long x 14mm Wide x 4mm Thick
£22.00 - SELCOM Drive Pulley Part Number: 32044Dimensions:
251mm OD x 44.5mm Wide with 24mm ID Keyway Centre
£85.00 -