Manufacturer
- Width 71-80 Remove This Item
- Width 51-60 Remove This Item
- ACLA 100mm Long Aluminium Guide Shoe Part Number: 10103Dimensions:
100mm Long x 75mm Wide x 35mm Deep
£16.00 - ACLA 100mm Long Aluminium Guide Shoe (Right Angle) Part Number: 10104Dimensions:
100mm Long x 75mm Wide x 90mm Deep
Fixing Hole Centres - 50mm£16.00 - ACLA 140mm Long Curved Cell Rubber Pre-Liner Part Number: 10109Dimensions:140mm Long x 55mm Wide x 37mm Deep£22.00
- ACLA 80mm Long Guide Shoe Liner to Suit 5mm Guide Rail Part Number: 10944Dimensions:80mm Long x 60mm Wide x 26mm Deep with 6.5mm Holes at 40mm Centres£15.00
- KONE Lock Arm & Roller (Right Hand) Part Number: 11015Dimensions:Bracket: 124mm Long x 53mm Wide
Roller: 31.5mm OD x 16.5mm Wide
£18.00 - KONE Lock Arm & Roller (Left Hand) Part Number: 11016Dimensions:Bracket: 124mm Long x 53mm Wide
Roller: 31.5mm OD x 16.5mm Wide
£18.00 - KONE Lock Release Assembly Part Number: 11077Dimensions:
105mm Long x 56mm Wide x 46mm Deep
£48.00 - KONE 80mm Long Monospace Steel Guide Shoe with Liner to Suit 16mm Rail Part Number: 11078Dimensions:80mm Long x 75mm Wide x 30.5mm Deep£18.00
- KONE ADL Stainless Steel Door Shoe with Nylon Gib Part Number: 11085Dimensions:72mm Long x 52mm Wide x 13mm Thick£9.60
- KONE Toothed Belt Pulley on Bracket Suit ADV Eline Monospace Part Number: 11094Dimensions:Bracket - 80mm Long x 60mm Wide x 42mm Deep
20mm Fixing Slot Centres - 50mm x 15mm
Roller - 43mm OD x 35mm£36.00 - KONE Stainless Steel Door Shoe with Nylon Gib to suit AMD/MRL/Monospace Part Number: 11143Dimensions:Total Height - 55mm x 80mm Wide (Max)
Gib - 1/2 Inch (12.7mm)
Hole Centres - 70mm
£16.00 - KONE Stainless Steel Door Shoe with Nylon Gib for ADV & ADT (Straight) Part Number: 11167Dimensions:85mm Long x 56mm Wide x 2.5mm Thick£11.50
- HAMMOND & CHAMPNESS Direction Arrow Part Number: 11205Dimensions:70mm Long x 57mm Wide x 5.5mm OD Fixing Holes£21.00
- KONE Door Lock Arm with Roller (Right Hand) Part Number: 11211Dimensions:
97mm Long x 56mm Wide x 31mm Deep
£19.50 - KONE Door Lock Arm with Roller (Left Hand) Part Number: 11213Dimensions:
97mm Long x 56mm Wide x 31mm Deep
£19.50 - HAMMOND & CHAMPNESS Pick Up Roller Assembly (Left Hand) Part Number: 11294Dimensions:
178mm Long x 51mm Wide x 69mm Deep
£69.00 - HAMMOND & CHAMPNESS Pick Up Roller Assembly (Right Hand) Part Number: 11295Dimensions:
178mm Long x 51mm Wide x 69mm Deep
£49.60 - DOVER, HAMMOND & CHAMPNESS Interlock Assembly I-68 (Left Hand) Part Number: 11318Dimensions:
148mm Long x 80mm Wide x 41mm Deep
£325.00 - DOVER, HAMMOND & CHAMPNESS Interlock Assembly I-68 (Right Hand) Part Number: 11319Dimensions:
148mm Long x 80mm Wide x 41mm Deep
£260.00 - ACLA Guide Rail Lubricator AK60 to Suit 5-16mm Guide Rail Part Number: 11467Dimensions:
116mm Long x 55mm Wide x 72mm Deep
£22.00 - ACLA Guide Rail Lubricator AK5 to Suit 5-20mm Guide Rail Part Number: 11472Dimensions:
87mm High x 79.5mm Wide x 79.5mm Deep
£32.00 - ACLA Oil Collector Pot to Suit 5-6mm Guide (Magnetic Fixings Available Separately) Part Number: 11497Dimensions:
Rail: 5-6mm
Length: 116mm
Width: 76mm
Height: 59mm
£13.00 - KLEEMANN 100mm Long Polyurethane Guide Block Part Number: 11620Dimensions:100mm Long x 60mm Wide x 10mm Deep with 2 x 12mm pegs£22.00
- KLEEMANN 90mm Long Polyurethane Guide Block Part Number: 11623Dimensions:90mm Long x 80mm Wide x 6mm Thick with 2 x 10mm pegs and 2 x 20mm ID holes£22.00
- CAN-LIFT Plug Contact Bridge Part Number: 11901Dimensions:
34mm Long x 56mm Wide x 33mm Deep with 28mm Contact Centres
£32.00 -
-
-
- GAL Car Gate Cover in Acrylic Part Number: 13020Dimensions:122mm Long x 52mm Wide x 3mm Thick£10.40
-
-
-
- GAL Door Closer Bracket Part Number: 13095Dimensions:Bracket - 120mm Long x 74mm Wide x 34mm Deep
Arm - 340mm Long£190.00 - THAMES VALLEY Tape Head (SE500) Part Number: 13391Dimensions:206mm Long x 58mm Wide x 10mm Thick£47.00
- THAMES VALLEY Tape Head Part Number: 13393Dimensions:
25mm High x 58mm Wide x 8mm Deep with 6 x 3.5mm ID Fixing Holes
Hole Centres - 44mm£13.00 - THAMES VALLEY Tape Head Cover Part Number: 13394Dimensions:26mm High x 57mm Wide x 3mm Deep with 2 x 3.5mm ID Fixing Holes
Hole Centres - 44mm£7.50 - DUPAR / DEWHURST VL11 Beak & Carrier Part Number: 17673Dimensions:
138mm Long x 51mm Wide x 89mm Deep
£160.00 - DUPAR / DEWHURST VL Lock Release Flag (Left Hand) Part Number: 17674Dimensions:
140mm Long x 60mm Wide x 10mm Deep
£25.00 - DUPAR / DEWHURST VL Lock Release Flag (Right Hand) Part Number: 17675Dimensions:
140mm Long x 60mm Wide x 10mm Deep
£25.00 - DUPAR / DEWHURST VL30 Lock (Left Hand) Part Number: 17683Dimensions:165mm Long x 80mm Wide x 58mm Deep£550.00
- DUPAR / DEWHURST VL30 Lock (Right Hand) Part Number: 17684Dimensions:165mm Long x 80mm Wide x 58mm Deep£550.00
- DUPAR / DEWHURST VL20 Lock Part Number: 17685Dimensions:165mm Long x 80mm Wide x 58mm Deep£420.00
- DUPAR / DEWHURST VL10 Lock (Left Hand) Part Number: 17686Dimensions:165mm Long x 79.5mm Wide x 57mm Deep£400.00
- DUPAR / DEWHURST VL10 Lock (Right Hand) Part Number: 17687Dimensions:165mm Long x 79.5mm Wide x 57mm Deep£400.00
- DUPAR / DEWHURST Clear Gate Lock Cover to Suit VL10 Part Number: 17690Dimensions:
165mm Long x 79mm Wide x 5mm Thick
£28.00 - DUPAR / DEWHURST Clear Gate Lock Cover to Suit VL11 Lock Part Number: 17691Dimensions:134mm Long x 58mm Wide x 3mm Thick£9.50
- DUPAR / DEWHURST Clear Lock Cover to Suit VL20 / VL30 / VL31 Part Number: 17692Dimensions:165mm Long x 80mm Wide x 5mm Thick£26.00
- DUPAR / DEWHURST Internal Clear Lock Cover Part Number: 17694Dimensions:77mm Long x 52mm Wide x 2mm Thick£28.00
- DUPAR / DEWHURST CGS Car Gate Switch with Striker Arm Part Number: 17698Dimensions:165mm Long x 51mm Wide x 43mm Deep£150.00
-