Manufacturer
- Product Types Guide Roller Assemblies Remove This Item
- Product Types Pins Remove This Item
- ACLA M10 Guide Roller Tapped Insert Part Number: 10201Dimensions:33mm Long with M10 tapped centre
Suits 2 x 6002ZZ Bearings£12.00 -
- ACLA M12 Tapped Guide Roller Tapped Insert Part Number: 10203Dimensions:57mm Long x 35mm OD£10.00
-
- ACLA M12 Guide Roller Tapped Insert Part Number: 10205Dimensions:
47mm Long x 35mm OD with M12 Tapped Hole
£11.00 - KONE Guide Roller Assembly with 3 x 150mm OD Rollers Part Number: 11033Dimensions:
217mm High x 305mm Wide x 215mm Deep Complete with 3 x Guide Rollers 150mm OD x 38mm Wide
£480.00 - KONE Guide Roller Assembly (Suits 16mm Guide Rail) Part Number: 11034Dimensions:
Overall: 176mm High x 170mm Wide x 125mm Deep
Contains: 3x Guide Rollers- 80mm OD x 28mm Wide with 2 x 20mm Bearings (6203)
6x Packers- 40mm Wide x 40mm Long with 14mm Wide x 20mm Long Slot
£380.00 - DUPAR / DEWHURST, HAMMOND & CHAMPNESS, PROPBROOK M10 Concentric Pin Part Number: 11227Dimensions:M10 Thread x 17mm OD£9.00
- DUPAR / DEWHURST, HAMMOND & CHAMPNESS, PROPBROOK M10 Eccentric Pin Part Number: 11228Dimensions:M10 Thread x 17mm OD£9.25
- HAMMOND & CHAMPNESS M12 Eccentric Pin Part Number: 11230Dimensions:35mm Total Length x M12 x 10mm Long Thread£9.50
- DOVER, HAMMOND & CHAMPNESS Pick Up Roller Shaft Part Number: 11298Dimensions:68mm Long x 12.5mm OD to suit 9.5mm ID Rollers£9.50
-
-
-
-
-
- EXPRESS Axle Pin for Limit Roller Part Number: 16109Dimensions:49mm Long x 9.5mm OD with 2 x 2.5mm Holes£12.50
- EXPRESS Guide Roller Assembly (R33) Part Number: 16112Dimensions:
Bracket: 67.5mm High x 153mm Wide x 112mm Deep (Max) 3 x Rollers: 75mm OD x 25mm Wide (Tapering to 12.7mm) with 1 x 17mm Bearing (6203RS)
£350.00 - EXPRESS Eccentric Nut for 16112 Assembly Part Number: 16114Dimensions:
12.7mm (1/2") ID x 13.5mm Wide
£12.50 -
-
- DUPAR / DEWHURST M8 Eccentric Pin Part Number: 17706Dimensions:
55mm Long x 8mm OD with M8 x 12mm Thread
£15.00 - DUPAR / DEWHURST M10 Concentric Pin in Stainless Steel Part Number: 17708Dimensions:39mm Long x M10 Thread£14.00
- DUPAR / DEWHURST M8 Threaded Pin, Nuts & Washers Part Number: 17710Dimensions:30mm Thread x M8£13.00
-
- THYSSEN M6 Pick Up Roller Shaft Part Number: 19204Dimensions:40mm Long with M6 x 22mm Thread£20.00
- OTIS Guide Roller Assembly with 2 Rollers (100mm OD) to Suit MRL GEN2 Part Number: 20146Dimensions:
Bracket: 210mm Long x 50mm Wide x 10mm Deep
Rollers: 100mm x 30mm Wide with 2 x 20mm Bearing (6204) - 160mm Centres£235.00 - OTIS Door Lock 6940A Eccentric Pin Part Number: 20160Dimensions:
Pin - 9.5mm OD x 22mm L
Shaft - 19mm OD x 38.5mm L
Head - 22mm OD x 3mm LTotal Length 63.5mm
£25.00 - OTIS Door Lock 6940A Eccentric Pin Part Number: 20161Dimensions:
Pin - 9.5mm OD x 27mm L
Shaft - 19mm OD x 26.36mm L
Head - 22mm OD x 3mm L£25.00 - OTIS Door Lock 6940A Eccentric Pin Part Number: 20162Dimensions:
Pin - 9.5mm OD x 27mm L
Shaft - 19mm OD x 29.5mm L
Head - 22mm OD x 3mm LTotal Length 59.5mm
£25.00 - OTIS Door Lock 6940A Eccentric Pin Part Number: 20163Dimensions:
Pin - 9.5mm OD x 27mm L
Shaft - 19mm OD x 35.88mm L
Head - 22mm OD x 3mm L£30.00 -
- OTIS M12 Concentric Pin Part Number: 20236Dimensions:Overall: 20mm OD x 42mm Long Thread: M12 x 20mm Long£9.00
- OTIS M12 Eccentric Pin Part Number: 20237Dimensions:Overall: 20mm OD x 42mm Long Thread: M12 x 20mm Long£13.50
-
- OTIS M12 Concentric Pin (Short Thread) Part Number: 20336Dimensions:35mm Long (Overall) x M12 x 13mm Long Thread£9.00
- OTIS M12 Eccentric Pin (Short Thread) Part Number: 20337Dimensions:35mm Long (Overall) x M12 x 13mm Long Thread£10.00
-
-
-
-
- WADSWORTH M12 Concentric Pin & Spacer Washer Part Number: 22452Dimensions:33mm Long with M12 x 7.5mm Thread£8.50
- WADSWORTH Steel Concentric Pin with Half Nut Part Number: 22453Dimensions:39mm Total Length. 5/8" (15.875mm) x 13mm Thread£8.75
- WADSWORTH Steel Concentric Pin with Half Nut Part Number: 22454Dimensions:46.5mm Long with 1/2" (12.7mm) x 14mm Thread£15.00
-
- BENNIE M12 Concentric Pin & Spacer Washer Part Number: 22951Dimensions:
36mm Long x 25mm OD
£25.00 - SELCOM M12 Eccentric Pin Part Number: 31957Dimensions:
Thread - M12 x 12mm Long
Shaft - M10 x 16.5mm Long
Total Length - 32.5mm£15.00 -
- SELCOM M12 Eccentric Pin Part Number: 32094Dimensions:
30.5mm Long x 12.7mm OD with M12 x 16mm Thread
£13.50 - IGV Guide Roller Assembly (78mm OD) Part Number: 33050Dimensions:
170mm Long x 51mm Wide with 2 x Guide Rollers 78mm OD x 30mm Wide with 2 x 20mm Bearings (6204)
£250.00