Search results for: 'hanger roller 49mm 15'
Shop By
Now Shopping by
Shopping Options
- Length/Height 21-40 Remove This Item
- ACLA M10 Guide Roller Tapped Insert Part Number: 10201Dimensions:33mm Long with M10 tapped centre
Suits 2 x 6002ZZ Bearings£12.00 -
- KONE Nylon Gib (AMD) Part Number: 11043Dimensions:
30mm Long x 14mm Wide x 12.5mm Thick (When Assembled)
£5.00 -
- KONE Skate Roller & Fixing with M5 Cap Bolt Part Number: 11181Dimensions:23mm OD x 25mm Long with M5 Cap Bolt£11.50
- HAMMOND & CHAMPNESS M12 Eccentric Pin Part Number: 11230Dimensions:35mm Total Length x M12 x 10mm Long Thread£9.50
- HAMMOND & CHAMPNESS Kicking Roller with M10 Pin Part Number: 11330Dimensions:22mm OD x 31mm Long
Pin - M10 x 10mm Long£19.50 -
-
-
-
-
- GAL Car Gate Roller with M6 Threaded Insert Part Number: 13018Dimensions:32mm OD x 12.5mm Wide with M6 x 25mm Threaded Insert£8.50
-
- DUPAR / DEWHURST M10 Concentric Pin in Stainless Steel Part Number: 17708Dimensions:39mm Long x M10 Thread£14.00
- DUPAR / DEWHURST M8 Threaded Pin, Nuts & Washers Part Number: 17710Dimensions:30mm Thread x M8£13.00
- ALJO Landing Release Roller with M8 Thread Part Number: 18205Dimensions:28mm OD x 20mm Wide with M8 x 32mm Long Stem£25.00
- FERMATOR Pick Up Roller Part Number: 18824Dimensions:
39mm OD x 12.7mm Wide with M10 x 33mm Threaded Stem
£28.00 - FERMATOR Kicking Roller with M10 Eccentric Pin Part Number: 18830Dimensions:
26mm OD with M10 x 12mm Threaded Stud Total Length - 29mm
£21.00 - FERMATOR Pick Up Roller Part Number: 18984Dimensions:
40mm OD x 12.5mm Wide with M10 x 17.5mm Thread
£23.00 - FERMATOR Nylon Butterfly Door Gib Part Number: 19104Dimensions:40mm Long x 14.5mm Wide x 14mm Deep with 1 x 9.5mm OD Hole in Centre£5.50
- THYSSEN M6 Pick Up Roller Shaft Part Number: 19204Dimensions:40mm Long with M6 x 22mm Thread£20.00
- THYSSEN Door Closer Spring Part Number: 19211Dimensions:
300mm Long (Between Loop Centres) x 15.5mm OD
£20.00 -
- OTIS Nylon Bumper for Beak to Suit 7080 Lock Part Number: 20262Dimensions:39mm Long x 13.5mm Wide x 17mm Deep with 9mm Slot£9.75
- OTIS Contact Holder for "L" Door Lock Part Number: 20301Dimensions:30mm Long x 13mm Wide x 37.5mm Deep£38.50
- OTIS M12 Eccentric Pin (Short Thread) Part Number: 20337Dimensions:35mm Long (Overall) x M12 x 13mm Long Thread£10.00
- OTIS Stainless Steel Door Shoe with Nylon Gib Part Number: 20566Dimensions:
Gib is 30mm Long x 12.7mm Wide x 12mm Deep
Bracket is 40mm Long
Hole Centres - 20mm
£18.00 - OTIS Door Shoe Bracket & Roller to Suit (Left Hand) Part Number: 20568Dimensions:
Bracket 50mm Wide x 32mm High x 28.5mm Thick
Roller 20mm OD x 12mm Wide
£48.50 - OTIS Door Shoe Bracket & Roller to Suit (Right Hand) Part Number: 20569Dimensions:
Bracket 50mm Wide x 32mm High x 28.5mm Thick
Roller 20mm OD x 12mm Wide
£48.50 -
- WADSWORTH Nylon Door Guide Block with M6 Pin Part Number: 22430Dimensions:38mm Long x 14mm Wide x 17mm Deep£15.00
- WADSWORTH Nylon Door Guide Block Part Number: 22431Dimensions:38mm Long x 14mm Wide x 17mm Deep£7.90
- WADSWORTH Steel Concentric Pin with Half Nut Part Number: 22453Dimensions:39mm Total Length. 5/8" (15.875mm) x 13mm Thread£8.75
-
- HAUSHAHN Kicking Roller with M8 Eccentric Pin Part Number: 25000Dimensions:26mm OD x 8mm Wide with M8 Eccentric Pin Total Length - 26mm£12.00
- SELCOM Nylon Butterfly Door Gib Part Number: 31904Dimensions:40mm Long x 12mm Wide x 25mm Deep£4.00
- SELCOM Polyurethane Door Gib Part Number: 31907Dimensions:40mm Long x 12mm Wide x 27.5mm Deep£8.00
- SELCOM Polyurethane Door Gib Part Number: 31908Dimensions:40mm Long x 14mm Wide x 27.5mm Deep£9.75
-
-
-
-
- SELCOM Nylon Door Gib to suit Fineline Part Number: 32028Dimensions:30mm Long x 13mm Wide x 7mm Thick£7.50
-
- SELCOM M12 Eccentric Pin Part Number: 32094Dimensions:
30.5mm Long x 12.7mm OD with M12 x 16mm Thread
£13.50 -
-
- IGV Rubber Matching Roller Part Number: 32949Dimensions:
50mm OD x 16mm Wide with M10 Shaft (34mm Long + 1mm Shoulder)
£13.00 - ELLIS McDOUGALL Upthrust Roller with M10 Thread Part Number: 33103Dimensions:
32mm OD with M10 Thread x 33.5mm
£26.00
Loading ...
Load More ...