Search results for: 'manufacturer wadsworth nylon lock roller'
Shop By
Now Shopping by
Shopping Options
- Length/Height 21-40 Remove This Item
- ACLA M10 Guide Roller Tapped Insert Part Number: 10201Dimensions:33mm Long with M10 tapped centre
Suits 2 x 6002ZZ Bearings£12.00 -
-
- KONE Nylon Gib (AMD) Part Number: 11043Dimensions:
30mm Long x 14mm Wide x 12.5mm Thick (When Assembled)
£5.00 -
- KONE Nylon Door Gib to Suit 11167 & 11137 Part Number: 11161Dimensions:30mm Long x 10mm Wide x 10mm Thick£9.50
- KONE Skate Roller & Fixing with M5 Cap Bolt Part Number: 11181Dimensions:23mm OD x 25mm Long with M5 Cap Bolt£11.50
- HAMMOND & CHAMPNESS Kicking Roller with M10 Pin Part Number: 11330Dimensions:22mm OD x 31mm Long
Pin - M10 x 10mm Long£19.50 -
-
- GAL Car Gate Roller with M6 Threaded Insert Part Number: 13018Dimensions:32mm OD x 12.5mm Wide with M6 x 25mm Threaded Insert£8.50
-
- EXPRESS Nylon Shoe For Cycloidal Drive Block Part Number: 16164Dimensions:32mm Long x 30mm Wide x 30mm Deep£17.50
-
- DUPAR / DEWHURST Nylon Lock Arm Knuckle Part Number: 17711Dimensions:
35mm Long x 27.5mm Wide x 16mm Thick
£30.00 - ALJO Landing Release Roller with M8 Thread Part Number: 18205Dimensions:28mm OD x 20mm Wide with M8 x 32mm Long Stem£25.00
- FERMATOR Pick Up Roller Part Number: 18824Dimensions:
39mm OD x 12.7mm Wide with M10 x 33mm Threaded Stem
£28.00 -
- FERMATOR Kicking Roller with M10 Eccentric Pin Part Number: 18830Dimensions:
26mm OD with M10 x 12mm Threaded Stud Total Length - 29mm
£21.00 - FERMATOR Pick Up Roller Part Number: 18984Dimensions:
40mm OD x 12.5mm Wide with M10 x 17.5mm Thread
£23.00 - FERMATOR Nylon Door Gib to suit Compact Door Shoe Part Number: 19003Dimensions:
29mm Long x 16.5mm Deep x 7.8mm Wide
£8.00 - FERMATOR, KLEEMANN Door Release System with Spring (Left Hand) Part Number: 19067Dimensions:38.5mm Long x 24.5mm Wide x 32.5mm Deep
Length of Spring from System - 35mm£9.00 - FERMATOR, KLEEMANN Door Release System with Spring (Right Hand) Part Number: 19068Dimensions:38.5mm Long x 24.5mm Wide x 32.5mm Deep
Length of Spring from System - 35mm£9.00 - FERMATOR Rubber Stop Support (Right Hand) Part Number: 19071Dimensions:23mm High x 110mm Wide x 17mm Deep£21.00
- FERMATOR Rubber Stop Support (Left Hand) Part Number: 19072Dimensions:23mm High x 110mm Wide x 17mm Deep£21.00
- FERMATOR Nylon Butterfly Door Gib Part Number: 19104Dimensions:40mm Long x 14.5mm Wide x 14mm Deep with 1 x 9.5mm OD Hole in Centre£5.50
- THYSSEN M6 Pick Up Roller Shaft Part Number: 19204Dimensions:40mm Long with M6 x 22mm Thread£20.00
-
- OTIS Lock Beak Contact for 9940 Lock Part Number: 20256Dimensions:45mm Wide x 21mm High x 13mm Deep£30.00
- OTIS Nylon Bumper for Beak to Suit 7080 Lock Part Number: 20262Dimensions:39mm Long x 13.5mm Wide x 17mm Deep with 9mm Slot£9.75
-
-
-
- OTIS Contact Holder for "L" Door Lock Part Number: 20301Dimensions:30mm Long x 13mm Wide x 37.5mm Deep£38.50
- OTIS Escutcheon for Lunar Key (20320) Part Number: 20324Dimensions:22mm OD (Widest) x 18mm OD (Narrowest) x 40mm Long£30.00
- OTIS Bush & Spring for Euro Lock Release on Prima Doors Part Number: 20372Dimensions:21mm Long x 26mm OD (Max) x 9.5mm ID£45.00
- OTIS Unlocking Mechanism to Suit Prima S Doors (Euro Type) Part Number: 20373Dimensions:19.5mm High x 32.5mm Long x 22mm Wide£25.00
- OTIS Stainless Steel Door Shoe with Nylon Gib Part Number: 20566Dimensions:
Gib is 30mm Long x 12.7mm Wide x 12mm Deep
Bracket is 40mm Long
Hole Centres - 20mm
£18.00 - OTIS Door Shoe Bracket & Roller to Suit (Left Hand) Part Number: 20568Dimensions:
Bracket 50mm Wide x 32mm High x 28.5mm Thick
Roller 20mm OD x 12mm Wide
£48.50 - OTIS Door Shoe Bracket & Roller to Suit (Right Hand) Part Number: 20569Dimensions:
Bracket 50mm Wide x 32mm High x 28.5mm Thick
Roller 20mm OD x 12mm Wide
£48.50 - OTIS Compression Spring to Suit 6940A Lock Part Number: 20663Dimensions:40mm Long x 17mm OD£8.00
- FURSE Nylon Door Gib Part Number: 22195Dimensions:
31.5mm Long x 17.5mm Wide x 22mm Deep x 7mm ID
£7.00 - FURSE Nylon Door Gib Part Number: 22196Dimensions:38mm Long x 17.5mm Wide x 19mm Deep x 6mm ID£7.00
- WADSWORTH Nylon Door Guide Block with M6 Pin Part Number: 22430Dimensions:38mm Long x 14mm Wide x 17mm Deep£15.00
- WADSWORTH Nylon Door Guide Block Part Number: 22431Dimensions:38mm Long x 14mm Wide x 17mm Deep£7.90
- WADSWORTH M12 Concentric Pin & Spacer Washer Part Number: 22452Dimensions:33mm Long with M12 x 7.5mm Thread£8.50
- WADSWORTH Steel Concentric Pin with Half Nut Part Number: 22453Dimensions:39mm Total Length. 5/8" (15.875mm) x 13mm Thread£8.75
-
- HAUSHAHN Kicking Roller with M8 Eccentric Pin Part Number: 25000Dimensions:26mm OD x 8mm Wide with M8 Eccentric Pin Total Length - 26mm£12.00
- SELCOM Nylon Butterfly Door Gib Part Number: 31904Dimensions:40mm Long x 12mm Wide x 25mm Deep£4.00
Loading ...
Load More ...